Jump to content

Recommended Posts

Posted

OK, I have the mains worked out on the Shee with Toomey T-6's. I am running 320 mains on a 99 Shee with no air box and with K&N clamp ons. Now the problem is that when I start it and let it idle it, it revs to the moon. I can pull the choke out 1 notch and it idles perfect. I have 25 pilots and the needle clip set at 4th notch from the top of the needle. This thing screams mid to top!! Just won't idle. I have a good idea what pilots it needs, I just want to get some 2nd opinions from some helpful buds!! Thanks, Mike :cheers:

Posted

I was thinking that by pulling the choke out 1 notch means that it is real lean. So I am assuming that a 30 pilot would be closer. What do you guys think? Mike :drool:

Posted

Yep, 30 pilot is what you need. That is what I run on my bike and if I pull the choke out when it is warm, it will die right away.

You are lean on the pilot, everything else sounds about right.

Posted

You guys are nuts...You have an air leak or your throttle is holding the slides up a hair...Motor can't rev unless it can get air....a motor is an air pump..

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...