DGFUNNY70 Posted August 10, 2004 Report Posted August 10, 2004 I WANTED TO KNOW IF ANYONE CAN TELL ME THE HOW I SHOULD SET THESE UP FOR A BANSHEE IE NEEDLES, NEEDLE JETS, PILOTS AND AIR SCREW. Quote
DGFUNNY70 Posted August 10, 2004 Author Report Posted August 10, 2004 ACTUALLY WHAT I SHOLD HAVE SAID IS IM LOOKING FOR WHAT I SHOULD START OUT WITH FOR NEEDLE JETS AND NEEDLES IE 5F21 NEEDLE AND O-8 NEEDLE JET WHICH I THINK THESE ARE WAY OFF Quote
JPL-ATV Posted August 17, 2004 Report Posted August 17, 2004 Yes, they are WAY off. Do Not run your Banshee with these as you're ri$king $eriou$ damage, catch my drift? $$$ We do have a jet kit available for these carbs - Pilots, Needles and Mains. Cost is $39.95 and it includes tuneing instructions. e-mail me at [email protected] if you'd like to order them. P.S. Please don't ask me to post the sizes online. I make my living from knowing the answers to questions like these and offering the solutions at a fair price. Thanks for understanding! Gunner Performance Technician Jackson Performance Laboratory Quote
superchicken Posted August 17, 2004 Report Posted August 17, 2004 P.S. Please don't ask me to post the sizes online. I make my living from knowing the answers to questions like these and offering the solutions at a fair price. Thanks for understanding! Gunner Performance Technician Jackson Performance Laboratory you have got to be kidding me! what are you a fucking idiot?thats the whole point of this forum.this is not a site to exand your sales,at the expense of people on this forum asking for FREE help.wich this site is on the internet for and you give them a price. Quote
JPL-ATV Posted August 18, 2004 Report Posted August 18, 2004 Dear superchicken, I suggest you reconsider your statement. The forum you are reading this in is "Questions for Banshee Performance Shops". As such, I offered a solution when noone else has stepped up to the plate. Maybe you'd like to take responsibility for the engine of the thread originator and offer him your wise jetting advice? Remember, if he follows it and it blows up, it's your fault. As I stated, the solution is available. There are members of this forum that do have my solution in their carbs under the brand name of one shop or another. Maybe they will post their knowledge (That they paid for, mind you) to help a fellow Banshee owner out. Then again, maybe they will keep their knowledge to themselves so guys like you don't benefit from it. Gunner Performance Technician with an attitude Jackson Performance Laboratory Quote
superchicken Posted August 18, 2004 Report Posted August 18, 2004 (edited) how about i consider this.when some one asks for help jetting a banshee,and gets it from some one online,wether it be a "performance shop" or just an everyday joe shmo like me, how the hell im i responsible for that engine?if i bought your jet kit and blow my shee up are you responsible for it?i bet you would fight tooth and nail to get out of your so-called responsibilty. Edited August 18, 2004 by superchicken Quote
bigwill Posted August 18, 2004 Report Posted August 18, 2004 (edited) Yeah-spend 40.00 to buy 10.00 in jets--there is a difference between helping and hustling-here at HQ-we buy jets-not jet KITS---I could be wrong-maybe its a NJ thing Edited August 18, 2004 by bigwill Quote
JPL-ATV Posted August 18, 2004 Report Posted August 18, 2004 Once again, another post in the PERFORMANCE SHOP section, with no useful info added to the thread. Yeah, for about $12 to $15 you could buy jets. Oh, and add about $10 each for the needles. Now, instead of dissing me, why don't you offer your HELP to this guy??? In case you forgot, he's looking for the PROPER setup for a pair of Mikuni Round Slide VM28's. Gunner... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.