shee screams Posted July 15, 2004 Report Share Posted July 15, 2004 HELP Please! I took my quad out of the shed and changed the neddles and jets, now it won't start. There is no spark coming from the plugs, and I tried another set, still nothing! I don't think changing the neddles and jets did anything to cause this problem. I think it is just bad timing, it ran ok before, but it bogged in the bottom end so I put the stock neddles back in, and droped 1 size in jets. Has anyone ever had this problem with there Banshee? If so what was the electrical problem caused from? It is driving me crazy Thanks for any help you can give! Quote Link to comment Share on other sites More sharing options...
frocashmoney24 Posted July 15, 2004 Report Share Posted July 15, 2004 its probably something with your tors, they really suck and cause all kinds of problems, or a wire that came disconnected somewhere, other major things could be a stator or a cdi Quote Link to comment Share on other sites More sharing options...
stclark04 Posted July 15, 2004 Report Share Posted July 15, 2004 check ur stator, the littlest thing in there can cause it to not work.. had same problem one time and come to find out my stator was bad.. one of the coils had a little bend in it, got a new one and it was fine again. hope u figure it out Quote Link to comment Share on other sites More sharing options...
shee screams Posted July 15, 2004 Author Report Share Posted July 15, 2004 I thought it might be one of them, but how do I figure out wich one it is that is causeing the problem. How do you test them, with a ohm meter? I checked all the wires, they all look good. thanks for the help so far. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.