blackred03 Posted June 24, 2004 Report Posted June 24, 2004 i just got the problem with my rad valve install fixed, and went for a ride. it realy ripped but after about 10 or so minutes into the ride it just bogged out then died. it started back up no problem but when i bogged out i was running probly 60mph and i couldnt get the motor to pick back up so i rolled to a stop. when i got it started it ran fine again, but within a couple minutes it started doing it again but this time i kept it running, im running the tr6 pipes and as you know they are fairly loud, but as i kept the motor running it sounded as though the pipes were verry quiet, i wasnt getting that normal pop out of them, then it backfires and i eventualy start to hear the pipes again can anyone help me Quote
sredish Posted June 24, 2004 Report Posted June 24, 2004 run a wot plug check and see if you look lean on the main... Quote
blackred03 Posted June 25, 2004 Author Report Posted June 25, 2004 is it normal though for the pipes to sound like nothing is there if its lean Quote
BenBB Posted June 25, 2004 Report Posted June 25, 2004 Yes, and a backfire is another symptom. Could be lean from mains too small, a clogged main, or an air leak... Quote
kenr74 Posted June 25, 2004 Report Posted June 25, 2004 Yep, you are lean. Take it easy or you will be replacing a top end. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.