421stroker Posted June 23, 2004 Report Posted June 23, 2004 Can some one please tell me the colors on thier cdi? I bought a 52y one and have had 3 different powervalvel controllers. I still can't figure this thing out. I just want to ride this year. Quote
BenBB Posted June 23, 2004 Report Posted June 23, 2004 Not sure if this will help, I took the wiring diagram I found and cut it down to what I think I'll need, bear in mind I haven't got that far yet... Quote
421stroker Posted June 23, 2004 Author Report Posted June 23, 2004 The problem I have is that I have a black/yellow off of the cdi and not the pv controller. Also, I have a black/white wire off of the pv controller and not off of the cdi. Quote
Minkia38 Posted June 24, 2004 Report Posted June 24, 2004 ill go take a look at my Rzshee tonight after work Quote
421stroker Posted June 24, 2004 Author Report Posted June 24, 2004 Ok, I really appreciate it. Kind of wondering why I started this whole rzshee conversion. I think I will put the blame on meat and his website. Quote
Minkia38 Posted June 28, 2004 Report Posted June 28, 2004 sorry it took so long - girlfriend was visiting out of my cdi you have: Red/white black/yellow orange Black Green white/red white/green brown out of my PV: black/red yellow/green white/black white/red hope this helps! Quote
421stroker Posted June 28, 2004 Author Report Posted June 28, 2004 Thanks, It looks like you have the same cdi as I do. Just a few more questions. 1. Does your cdi say 52y on it? 2. What color are the wires on your pv controler? 3. What does your black/yellow wire go into on the cdi? Quote
Minkia38 Posted June 28, 2004 Report Posted June 28, 2004 cant go outside now, but while zooming in on a pic, it looks like xxx-xx possibly: ?7y-50 the wires out of my pv are listed above i taped and shrink tubed all my wires, so its hard to tell what goes where....... Quote
421stroker Posted July 1, 2004 Author Report Posted July 1, 2004 Thanks for you help Minkia38. I understand about the finding where the wires go, but the thing is you don't really specify a black/white coming out of the CDI or a black/yellow coming out of the powervalve controler(not powervalve servo). If you look at BenBB's diagram there is black/white and a black/yellow that go from the powervalve controler to the CDI. This makes no sense to me why I don't have a black/yellow coming out of the CDI or a black/white coming out of the pv controller. But I do have a black/yellow coming out of the CDI and a black/white coming out of the pv controller that have no place to plug into. I believe these wires are the ones that tell the powervalvle's how to move a a specific rpm. I hope I don't come off as an ass or something but this is about my last try before I part out the rzshee and sink money into the truck. Thanks for the help. Quote
Minkia38 Posted July 1, 2004 Report Posted July 1, 2004 wish i could help ya more - but like i said - all my wires are taped up now...... just put those 2 wires together and see what happens! Quote
421stroker Posted July 1, 2004 Author Report Posted July 1, 2004 I did. Nothing hapened. Did you have any diagrams or remember any wires that just hung there not connected to anything? Quote
Minkia38 Posted July 1, 2004 Report Posted July 1, 2004 i went to town with a razor and my clymers manual. just started cutting everything non needed off that was last summer, so i forget what wires went where now...... Quote
Minkia38 Posted July 1, 2004 Report Posted July 1, 2004 heres the only pre electrical tape pic i have Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.