A NOISE FROM THE SEE.. ADVICE NEEDED

[BaNsHEE ELiMiNaToR]

Hello. I have a 02 shee, she was a left over in the ware house so i got a great deal on her. She was brand new.. Over the winter i put a paul turner head on with 22 cc domes, Toomey T-5, Jetts, No air box just Clamp On K&N filters, Boyseen Reeds... Now i beleive i am hearing a vibration sound or some what. After a few hours of riding my shee i will begin to notice when i rev it up and let go of the throtle to idol down i hear like a 2 second vibration noise. It sounds like its coming over by the engine some where. The shee is runnin like a batt out of hell, very fast, so i wasnt sure if it was anything with the engine. It sounds like something was vibrating on the frame or something. Anyone have this problem? Anyone got any suggestions? Yes when the shee was built all the Torque settings were done rite. Please Help If yOU can!! THanks....

[azsandrat]

YOU MIGHT CHECK TO SEE IF THE PIPES ARE HITTING SOMEWHERE ALSO. I'VE HAD A FEW OF THOSE.

[2Smoker]

I have the exact same problem ever since I put a new piston and rings in. It gets warmed up and I rev it up and when the revs come down I hear a vibration noise. The thing that bothers me is it sounds like it's coming from the engine. I've driven it pretty hard the last couple of weeks and nothing has blown up, I don't think it's serious. I thought it might be my wrist pin bearing because I just slapped a piston in to replace the one I burned a hole in and never replaced anything else but the piston and rings.

 

I have a friend who runs stock pipes and his vibrates the same way and it's his pipes for sure, it's harder to tell on mine. Shees vibrate like crazy, I wouldn't lose sleep over it.