97banshrider Posted June 22, 2004 Report Share Posted June 22, 2004 hey everyone i'm looking for some suggestions for the jetting on my 97' bansh. it's bored 0.20, K&N's, toomey t-5's, white bros boost bottle, boyesen power reeds, 1/2" reed spacers and i'm riding in utah, between 3500 ft to 4700 ft above sea level. any help? Quote Link to comment Share on other sites More sharing options...
BenBB Posted June 23, 2004 Report Share Posted June 23, 2004 I'd start with 320 mains, 30 pilots, needle clip one position leaner than stock (2nd groove from the top or blunt end), and airscrews 1.5 turns out. Assuming 32:1 premix ratio and 60-80 degree temps, should be a safe starting point (may need a size or two larger on the mains but that's where I would start). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.