Jump to content

cant start


Recommended Posts

I have a new banshee. I put reeds and pro cucurit pipes on it. It was running good in the winter. But when it got warm it would not start. I tryed lots of different jets in it to. But If I spray some gas into the carbs it starts. It runs great. Only on cold start up. If I let it sit for over a hour it will not start. I dunno what to do. It gets lots of gas. She still goes fast. Good compression. around 125 if i remeber right. what should I try next.

Link to comment
Share on other sites

While you are checking the float height you need to make sure the pilot jets are clean. If you need to squirt in extra gas to get it to start then pilots could be plugged. Pull the float bowls, remove pilot jets, and check visually to be sure they are open. Otherwise blow them out.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...