Hefe4Pres Posted May 21, 2004 Report Posted May 21, 2004 I have recently put on some PC pipes on my Banshee and am not sure if i am jetted right. The top end runs great but the bottom end is real sluggish. Is this typical of PC pipes? Quote
banshdog Posted May 21, 2004 Report Posted May 21, 2004 What jets did you put in? and what are your mods? My mods and jets are listed below. My bike had crap low end when i first put them on, cleared up with a larger pilot jet. Quote
MILO Posted May 22, 2004 Report Posted May 22, 2004 my pc's pull fine bottom to top after getting it jetted right. once everything is dialed in, they should be fine. Quote
straight line Posted June 20, 2004 Report Posted June 20, 2004 i have pro circuit pipes on my 03 an they really work great i ran a 260 main rest stock settings with the k&n in box filter with no snorkel and it had good power from top to bottom depends on what other mods u have thoo plus elevation im from northern minnesota quiet low elevaion Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.