SouthernBanshee Posted May 17, 2004 Report Posted May 17, 2004 i want to get my stock head milled .030 but i need to know which is the size of the step between the head seat and the dome. My stock head is 1.3 mm more or less. Is That the stock size or has been milled before???? my compression is 126 and 128. Sea level thanx Quote
boonman Posted May 17, 2004 Report Posted May 17, 2004 That head sounds like stock. I don't know how your measuring..... But it sounds like stock measurement...... Quote
ledofthezep Posted May 17, 2004 Report Posted May 17, 2004 That compression sounds about like a stock reading, pretty good for stock I believe...what other mods do you have done? any? Quote
SouthernBanshee Posted May 17, 2004 Author Report Posted May 17, 2004 i used a metric caliper. i dont know if it is the exact mesure but its very aproximate... thanx boonman...i already took the flywheel and the stator plate to mod. Quote
SouthernBanshee Posted May 17, 2004 Author Report Posted May 17, 2004 That compression sounds about like a stock reading, pretty good for stock I believe...what other mods do you have done? any? engine is stock. Other mods: PTR Hi-Rev pipes, ported reed cages with boyesen power reeds and pro-flow air filter. ive just modified the stator plate +4 and will get the flywheel lightened... thanx Quote
boonman Posted May 17, 2004 Report Posted May 17, 2004 Thhe measurement sounds stock... I have always measured a stock head to be around .050"...... Which is about 1.269mm... Quote
SouthernBanshee Posted May 17, 2004 Author Report Posted May 17, 2004 great!! so i will take .030!!! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.