Hockey390 Posted April 15, 2004 Report Posted April 15, 2004 Can I powdercoat my A arms myself?? Someone told me a while back that I could do my rims in the oven, so I would assume the same for A-Arms... If I can, where can I get the how-to and where can I get the stuff I need to do it? Quote
cb67rs1 Posted April 15, 2004 Report Posted April 15, 2004 are they stock? if they are thenyou CANNOT do them in a oven. if they are aftermarket with removable joints you can. Quote
Hockey390 Posted April 15, 2004 Author Report Posted April 15, 2004 (edited) damn........... Whats the best quality paint below powder coating then...? How much am I looking at to do 2 a-arms and 2 J-arms...? And where can I get it...? Edited April 15, 2004 by Hockey390 Quote
hash1250r Posted April 16, 2004 Report Posted April 16, 2004 http://www.prp-porstore.com/index.htm Try this stuff. Its the next best thing to powdercoating. You can do you stock arms but they wont be fully cured. They cant be cured for as long and they are baked at a lowwer temp. Quote
Im-Loving-It 69 Posted April 16, 2004 Report Posted April 16, 2004 (edited) I powdrcoated my A-arms. All you have to do is get all the melted/hard grees out of the ball joints befor you put them back together. and i have had no problem with them and i powdercoated them about a year ago. Alsoyou can buy a powdrcoat paint, I have used this of a few thatgs and it withstands alot mor then any paint that i have seen. Edited April 16, 2004 by Im-Loving-It 69 Quote
Hockey390 Posted April 16, 2004 Author Report Posted April 16, 2004 As for tha POR-15 paint, is there anything i can get that is more then just...black, silver...and clear? Quote
Twitchy Posted April 18, 2004 Report Posted April 18, 2004 The colors u see are what they offer. The POR-15 is awesome tho, tough shit, used it several times. Quote
wansomordis Posted April 27, 2004 Report Posted April 27, 2004 I powdrcoated my A-arms. All you have to do is get all the melted/hard grees out of the ball joints befor you put them back together. and i have had no problem with them and i powdercoated them about a year ago. Alsoyou can buy a powdrcoat paint, I have used this of a few thatgs and it withstands alot mor then any paint that i have seen. That makes 2 of us that HAVE done the unpossible.... I also added grease zerks to the bottom A-arm Ball Joints Quote
akpopeye Posted May 3, 2004 Report Posted May 3, 2004 Por products are the best, and yes there is different colors, look through all the products and fine the "hardnose" i think its called, colors on www.porstore.com Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.