dogboystoy Posted March 30, 2004 Report Posted March 30, 2004 OK, I have been looking for awhile to find the sizes. We all know there are 2 sizes of bolts for the stator/Sprocket cover. 6X55mm and 6X20mm Now you can go buy the Stainless SHCS sizes you need. Quote
sweetshee4312 Posted March 30, 2004 Report Posted March 30, 2004 are they the same for the clutch cover, oo and, im definatly getting some new ones, i just took off my clutch cover last night, casue im taking out my crank, and i had to use a chsiel, even with me holding the engine and my dad tring, they just stripped Quote
dogboystoy Posted March 30, 2004 Author Report Posted March 30, 2004 To get at the clutch you have to take apart the left side right? Isnt that by the stator? If it is, the left side cover uses those bolts.. I havent taken mine apart but I would think that the left and right would share some of the same bolt sizes. All I know is the left side needs these 2 sizes to attach it to the engine. Quote
bigboybanshee Posted March 30, 2004 Report Posted March 30, 2004 To get at the clutch you have to take apart the left side right? Clutch is on the right side Quote
wansomordis Posted March 30, 2004 Report Posted March 30, 2004 To get at the clutch you have to take apart the left side right? I'd say use the money for the bolts any buy yourself a manual cause your gonna need it talking like that.. And you use 10/30 to mix with your gas right 1 qt to 5 gallons??? Quote
BenBB Posted March 30, 2004 Report Posted March 30, 2004 Right on dogboystoy, I measured every bolt outta my RZ and this is what I got: Stator cover: 3-6mmx55mm 1.0 (thread pitch) 4-6mmx15mm 1.0 Clutch cover: 8-6mmx30mm 1.0 1-6mmx40mm 1.0 Clutch round inner cover: 3-5mmx12mm or 13mm 0.75 Water pump inner cover: 5-6mmx15mm 1.0 Water pump outer cover: 3-6mmx20mm 1.0 And a bunch of others like case & PV stuff, but I got SS SOHC bolts from Fastenal for the whole motor (except the funky RZ head nuts) for like $27... Quote
Cotton eyed Joe Posted March 30, 2004 Report Posted March 30, 2004 Right on dogboystoy, I measured every bolt outta my RZ and this is what I got: Stator cover: 3-6mmx55mm 1.0 (thread pitch) 4-6mmx15mm 1.0 Clutch cover: 8-6mmx30mm 1.0 1-6mmx40mm 1.0 Clutch round inner cover: 3-5mmx12mm or 13mm 0.75 Water pump inner cover: 5-6mmx15mm 1.0 Water pump outer cover: 3-6mmx20mm 1.0 And a bunch of others like case & PV stuff, but I got SS SOHC bolts from Fastenal for the whole motor (except the funky RZ head nuts) for like $27... Ben, I sure hope your company paid for those through Fastenal. I don't know about NM, but here, the fuckers jack everything up alot. I priced my fasteners that I use for my billet through them just to compare to my local supplier. They were over 5x the price on almost everything, but most things I wanted in Stainless, they couldn't get. Just FYI. Quote
BenBB Posted March 31, 2004 Report Posted March 31, 2004 Yep Stan, I got the "discount", heh. I was a little surprised they were that cheap, I mean I got every bolt in SS SOHC and every nut for the motor, thought it woulda cost more but I wasn't payin' for it. They've been real competitive on standard hardware tho, at least compared to the other games in town. Quote
Cotton eyed Joe Posted March 31, 2004 Report Posted March 31, 2004 Yep Stan, I got the "discount", heh. I was a little surprised they were that cheap, I mean I got every bolt in SS SOHC and every nut for the motor, thought it woulda cost more but I wasn't payin' for it. They've been real competitive on standard hardware tho, at least compared to the other games in town. WOW..thats good. The other games in that town must be real assholes. We compared again yesterday (damn salesmen won't leave us alone.) Their prices here are almost as high as Lowes. Oh, and they had a nice $3,500 swamp cooler for our shop, and a $2,000 tool box they could bring by so we could check them out. ok........ The only thing we did buy from them was our Norton grinding wheels. Its a 16" wheel with an 8 " balancer. We knew we were going to have to have them made, so we gave Fastenal a call. They are $3.00 more than the next guy, so when you are talking $350 per wheel, 2 wheel minimum, it didn't really matter, and this kid looked like he was going to starve to death at any minute. Quote
dogboystoy Posted March 31, 2004 Author Report Posted March 31, 2004 yea, well Like I said, I have never taken the thing apart, and I havent looked at the banshee in 4 months, so my brain is cookoo. Going through banshee withdrawls. I hope to change all of that soon. Quote
wansomordis Posted April 1, 2004 Report Posted April 1, 2004 Hey I found a web site to buy stainless steel bolts and was wondering are they average priced or full blown crooks ????? http://www.boltdepot.com/metric-socket-products.aspx Quote
dogboystoy Posted April 1, 2004 Author Report Posted April 1, 2004 Rip off,,,,, Check out MCMASTER CARR. see link.... Type in Metric SHCS in their search bar. I bought 18-8 SS. I got 6X55mm (qty 25) for 9$ and that is the more expensive size out of the bunch.MCMaster Carr Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.