Justintoxicated Posted February 6, 2004 Report Posted February 6, 2004 Hey guys, Im guesing it does not matter which way the reed gaskets go, But I noticed there is a plain side and a side with stripes, I also noticed when I removed them that one side wanted to stick more than the other, but this could have just been cowincidence. Does it matter which Way I put them? Quote
evil Posted February 6, 2004 Report Posted February 6, 2004 id say put the lined side on the motor, just for the hell of it. if theres no groves or anything it it and both sides are flat, then it really wont matter. Quote
Aussie Quad Racer Posted February 6, 2004 Report Posted February 6, 2004 it does not matter a shit. the lines are probably from the sheet of gasket paper that they cut them from Quote
fixitrod Posted February 6, 2004 Report Posted February 6, 2004 The lines may be a material that causes them to seal also. Kind of like the stock head gasket has on it. I'd put the line side toward the enging also, but if you have them on already, I wouldn't worry about it. Quote
Justintoxicated Posted February 7, 2004 Author Report Posted February 7, 2004 nah it was late last night, I did get the cylinders and head back on though... It should be together soon, that is if I don't mind worknig on it in the freezing cold at night. I'll put them on with the lined side towads the cylinders. thanks, JI Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.