T469 Posted January 27, 2004 Report Posted January 27, 2004 are there any good tricks to getting the a-arms off. the bolt going through will not budge. i've beat the shit out of it trying to get it out but no luck. figured i'd spray it with pb-blaster for a few days and let it sit, but wondering if there was any other tricks. Quote
frocashmoney24 Posted January 27, 2004 Report Posted January 27, 2004 aarms are a bitch, just remove your pipes and give it hell with a big hammer but keep the nut on the end so you dont strip the threads Quote
demsy Posted January 27, 2004 Report Posted January 27, 2004 i just removed my arms, the sleeve that the bolt goes through on one of them got seized to the bolt. i beat on it with no luck. finally got a dremal and cut the off some of the bolt enough where i was able to mangle it out. hope it helps. Quote
ledofthezep Posted January 27, 2004 Report Posted January 27, 2004 I used a block of wood, some WD, a BFH, & a punch. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.