dalegoldston Posted January 4, 2004 Report Posted January 4, 2004 Well I am not getting fire to the plugs. I have used the manual to OHM out the iginition and the Stator. I replaced the plugs and still nothing. What would be the next step ? Maybe borrow a CDI and try that? This really blows. I hate electrical shit. Quote
dalegoldston Posted January 5, 2004 Author Report Posted January 5, 2004 One more time. Any suggestions Quote
BenBB Posted January 5, 2004 Report Posted January 5, 2004 OK if the stator and pickup coil are within resistance specs, you can either test the coil with an ohmmeter or have a shop bench test it (usually free). Then trace the wiring harness and make sure that all the connectors are tight and no wires have rubbed against the frame and grounded out. Don't worry about the lighting system (voltage regulator, yellow wire from stator, light switch, etc.) for now, concentrate on the ignition system. Double check the key and handlebar kill switch; make sure they're "on" and the connectors are tight. After that, pretty much all that's left is the CDI, and the only way to test it is to swap in a known working one... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.