Metal_man_Rob Posted March 20, 2021 Report Posted March 20, 2021 The lower A-arm bushings on one side are shot. Just one side but I need this bike going today so don’t have time to disassemble everything.Wondering if I can change the A-arm bushings without removing the hub assembly again.Figured if I remove the lower shock retainer and pull the bolts from the lower arm, I can drop it enough to replace.Or is it essential that I remove the spindle, and disassemble everything? On a side note... bolts were stuck in steel tube. Used a length of threaded rod (5/8-18 [fine thread]), 3.5” long with a nut on either end. Used a steel shim on either end and loosed the nuts to wedge between the two lower swing arm bolts. Then just turned the end bolts counter clockwise until one popped loose then the other. Sent from my iPhone using Tapatalk Quote
Metal_man_Rob Posted March 21, 2021 Author Report Posted March 21, 2021 Yeah, every time I post from the app it will post over and over again but doesn’t confirm. App bug.Sent from my iPhone using Tapatalk Quote
375hp banshees Posted March 21, 2021 Report Posted March 21, 2021 Not tapatalk...say it aint soSent from my SM-A505U using Tapatalk 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.