Jump to content

Recommended Posts

Posted

So my carb has started leaking out of the overflow randomly every other week or so. I sent some pictures to a buddy of mine and he said the float adjustment looks fine and that I should check the needle and seat to see if it needs replaced. It looks fine to me (even though I am still going to replace it) so I just cleaned it with a Q-tip and carb cleaner and put everything back together.

 

After doing so, I noticed there was air in the fuel line and no fuel was going to the carb so I took the needle and seat out, cleaned, and then after it was all back together gas was flowing to the carb and it started right up. However after warming up for 5 minutes I took it down the road to make sure all was well and it died on me. The only way I could get it started was with the choke on and it would only go about 100ft at a time and die.

 

Any ideas on what to do? Should the new needle and seat fix the issue?

 

 

Sent from my iPhone using Tapatalk

 

 

 

EDIT: This is a Keihin 35mm 1-2 carb.

Posted

Doubtful the running out of fuel is a needle/seat issue. You could need new ones but it they were worn you would have a fuel surplus and not deficit. Try taking the gas cap off and see if the problem goes away. Some vent hoses or caps will cause this problem. Next I would check the screen on the petcock inside the tank. They do clog up and cleaning it should be part of regular maintenance. 

On a side note, you shouldn't leave your petcock on when the bike is sitting.

 

Posted

Okay I will go and try this here in a minute. I have always made it a habit to turn the fuel off on anything with a carb when I’m off the bike. Will let you know how it goes..


Sent from my iPhone using Tapatalk

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...