Offroadobsessions Posted May 5, 2018 Report Posted May 5, 2018 Im looking to get a recommendation on where to start with jetting my new setup. I am at sea level 392 with drag port, stock stroke, 18cc domes, CPI inframes, PWK35's w/ CEL needles, I will be running 110 octane. Quote
Offroadobsessions Posted May 11, 2018 Author Report Posted May 11, 2018 Right now im at 160 main, 45 pilot, and middle clip. It cranks and idles great but breaks up on the big end. I also have a dyna CDI and Rage ATV did some map adjusting on the original setup so i'm unsure of what the ignition curve is doing. Quote
christoph.tamz Posted May 27, 2018 Report Posted May 27, 2018 Does that jetting also work for the same mods but a 421 cheetah cub with a 4mil stroker motorSent from my SM-N920V using Tapatalk Quote
locogato11283 Posted May 27, 2018 Report Posted May 27, 2018 $10 says if you get rid of the Dyna and put an OEM CDI on it, the breaking up goes away. 162/45 should be really close. Quote
locogato11283 Posted May 27, 2018 Report Posted May 27, 2018 Does that jetting also work for the same mods but a 421 cheetah cub with a 4mil stroker motorSent from my SM-N920V using TapatalkYes, depending on elevation and temp. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.