martin059 Posted August 20, 2017 Report Posted August 20, 2017 What's up guys I want to take apart my carbs and clean them. Do I have to buy a rebuild kit? Or will I be fine just to take apart and clean and reassemble ? Sent from my iPhone using Tapatalk Quote
hicksons Posted August 20, 2017 Report Posted August 20, 2017 You should be fine to clean and reassemble Sent from my iPhone using Tapatalk Quote
hoppedupandcutdown Posted August 20, 2017 Report Posted August 20, 2017 ^^That. The only things useful in a kit is the bowl gasket and 99.9% of the time re-use is no problem. And the needle valve and seat. Inspect your needle valve tip for any little bit of a wear ring. (you can get those separately) Quote
martin059 Posted August 20, 2017 Author Report Posted August 20, 2017 Ok thanks for the answers I'm gonna go clean Sent from my iPhone using Tapatalk Quote
martin059 Posted August 30, 2017 Author Report Posted August 30, 2017 So I cleaned my carbs. Now their is a little bog ? Any guesses what went wrong... Sent from my iPhone using Tapatalk Quote
ginger Posted August 30, 2017 Report Posted August 30, 2017 slides in the correct way? is the bowl with the choke circuit on the left side? Quote
martin059 Posted August 30, 2017 Author Report Posted August 30, 2017 I'll check Sent from my iPhone using Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.