Lowflyin Posted August 16, 2017 Report Share Posted August 16, 2017 Ive never experienced it but weird stuff can happen with the wrong domes/angleSent from my LG-H820 using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
Rawnold Posted August 16, 2017 Author Report Share Posted August 16, 2017 Alright so just looked up some videos and looked through forums some people say to remove my head some say you can check it with a solder through the spark plug holes. which would you guys reccomend? Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted August 16, 2017 Report Share Posted August 16, 2017 Leave the head on. Bend the solder in an L shape and get it over the direction of the wrist pin. Roll the motor over so it smushes the solder. FYI, make sure the solder is filed smooth after you cut it and make sure it goes all the way over to the edge of the bore where it meets the dome angle. 1 Quote Link to comment Share on other sites More sharing options...
Ayesully810 Posted August 16, 2017 Report Share Posted August 16, 2017 1 hour ago, Rawnold said: ALSO the quad idles in N but dies as I drop first with no gas This sounds like u need to adjust ur clutch a bit 1 Quote Link to comment Share on other sites More sharing options...
Rawnold Posted August 16, 2017 Author Report Share Posted August 16, 2017 1 hour ago, Ayesully810 said: This sounds like u need to adjust ur clutch a bit In the case or by the perch? Also what are you the thoughts on the 25 pilot jet? Quote Link to comment Share on other sites More sharing options...
Rawnold Posted August 16, 2017 Author Report Share Posted August 16, 2017 1 hour ago, trickedcarbine said: Leave the head on. Bend the solder in an L shape and get it over the direction of the wrist pin. Roll the motor over so it smushes the solder. FYI, make sure the solder is filed smooth after you cut it and make sure it goes all the way over to the edge of the bore where it meets the dome angle. Gotcha, to roll the motor over can I do it with the kicker by hand or do I have to get to the flywheel or something? Also what thickness solder if it matters Quote Link to comment Share on other sites More sharing options...
sleeper06 Posted August 18, 2017 Report Share Posted August 18, 2017 .060 or .090 Quote Link to comment Share on other sites More sharing options...
Ayesully810 Posted August 18, 2017 Report Share Posted August 18, 2017 (edited) On Wednesday, August 16, 2017 at 2:31 PM, Rawnold said: In the case or by the perch? Also what are you the thoughts on the 25 pilot jet? lean pilot and at the perch. back your cable out more on your perch Edited August 18, 2017 by Ayesully810 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.