cmoore14 Posted July 4, 2017 Report Posted July 4, 2017 Riding and back tires locked when I shifted to 2nd now won't move when I star it and put it in 1st gear Quote
ginger Posted July 5, 2017 Report Posted July 5, 2017 A little more information would do you wonders Quote
trickedcarbine Posted July 5, 2017 Report Posted July 5, 2017 pull the clutch cover first. If there isn't any obvious culprit, you'll be splitting the cases. Quote
blowit Posted July 5, 2017 Report Posted July 5, 2017 Sounds like a gear welded itself to a transmission axle. Can't remember right off but thinking it was 2nd that was known for this and the newer OEM gear now has a better bushing in it. We dealt with several over the years. Basically a gear that should spin free on a trans shaft welds itself on. Indications would be to remove the drive chain, then pull clutch lever and start bike. If engine will run but even slightly bogs engine when you try to engage clutch, the trans has issues. Brandon Mull Engineering 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.