Wiring lights

[guns4children]

I got those cheap led lights off amazon and I wanna wire them using stock plugs. Just don't know what wires to connect. See attached picture.

 

Damn this tablet has a shitty camera. Supposed to shoot HD video I call BSC.

 

 

Sent from Planned Parenthood

[phillybuilt]

Two of those wires (from banshee) will be positive, with a test light you can tell which ones are. One for low beam one for high. I think grey is the ground... My '99 is wired the same way, and I have yellow and green both tapped into the power wire, and I have a black wire where you have a grey, which is grounded right to the light's ground. Either way, you can wire both of the positive wires to the red, and the negative to the black on the light.

[rubberneck]

If i remember low beam is green and high beam is yellow.  the greyish brown wire is ground.  Just decide if you wants lights to come on when switch is in the high or low beam postion on the switch then choose the appropriate wire

[guns4children]

Thanks guys!