banshee_blue_03 Posted October 19, 2016 Report Posted October 19, 2016 Got new chain rollers and cascade slider. Curious how tight the bolt needs to be on the roller(s)? At one point the roller spins freely, but the nut/bolt spin too. Slightly tighter to where the nut/bolt don't spin and it feels like the roller is restricted. So how tight should it be? Quote
Its_Fluffy_123 Posted October 19, 2016 Report Posted October 19, 2016 As long as the roller spins freely, ya it should be good. Quote
hoppedupandcutdown Posted October 20, 2016 Report Posted October 20, 2016 Bolt should not spin Roller should spin free Try a washer between the roller and frame 1 Quote
banshee_blue_03 Posted October 20, 2016 Author Report Posted October 20, 2016 Yea that's what I thought. Ended up sticking a washer between the frame and roller and seems good to go. Just thought it was odd that the roller didn't come with that washer (MSR roller purchased from Cascade). Thanks Quote
Its_Fluffy_123 Posted October 20, 2016 Report Posted October 20, 2016 Yea that's what I thought. Ended up sticking a washer between the frame and roller and seems good to go. Just thought it was odd that the roller didn't come with that washer (MSR roller purchased from Cascade). Thanks You could also just call cascade and they'd be happy to help you out with any problems, especially chris or tim. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.