regp Posted June 10, 2016 Report Posted June 10, 2016 I got an 03 banshee that is basically a frame and a big box of rusty parts. Supposedly the chain broke before the guy pulled it apart. Where is a good place to start with it? Someone suggested getting the parts cleaned up and ordering a bolt kit for it. Any other suggestions? It's a little intimidating to look at it, and not really know what you're doing lol. Quote
bigweav81 Posted June 10, 2016 Report Posted June 10, 2016 Buy a clymers manual, and necessary tools. Sent from my SM-S820L using Tapatalk 1 Quote
sheerider11 Posted June 11, 2016 Report Posted June 11, 2016 I got an 03 banshee that is basically a frame and a big box of rusty parts. Supposedly the chain broke before the guy pulled it apart. Where is a good place to start with it? Someone suggested getting the parts cleaned up and ordering a bolt kit for it. Any other suggestions? It's a little intimidating to look at it, and not really know what you're doing lol.A Clymers like stated and an alloy bolts kit would be nice because it list where all the bolts go Quote
Yamahafan#1 Posted June 21, 2016 Report Posted June 21, 2016 And ur gonna be on here quite a bit, Remember u can almost find a video on anything. U should post up some pics Quote
JTmachining Posted June 21, 2016 Report Posted June 21, 2016 Buy a clymers manual, and necessary tools. Sent from my SM-S820L using Tapatalk This Quote
salmon_slayer06 Posted June 24, 2016 Report Posted June 24, 2016 It's always intimidating the 1st time. One thing for sure, make sure to clean and relube all the bearings in the motor. Order new ones if in doubt cause lots of stress get put on these. Imo the banshee motor is a very easy one to work on. Lots of potential in these engines hope you one day get to enjoy it... Quote
salmon_slayer06 Posted June 24, 2016 Report Posted June 24, 2016 Might want to check out motor city Atv for replacement parts such as flywheel, stator, Cdi and coil as these are very expensive new and aftermarket is cheap knock offs. Quote
sheerider11 Posted June 24, 2016 Report Posted June 24, 2016 Might want to check out motor city Atv for replacement parts such as flywheel, stator, Cdi and coil as these are very expensive new and aftermarket is cheap knock offs.Are you fucking new here?? Quote
bigweav81 Posted June 24, 2016 Report Posted June 24, 2016 (edited) Or just buy used parts from a reputable member. Not knocking motor city atv. I've bought shit he carries for driveline performance. That's where it ends though. Sent from my SM-S820L using Tapatalk Edited June 24, 2016 by bigweav81 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.