Banshee will only spark when push started

[Larry's Shee]

What do the plug caps ohm out at?

 

Banshee I'm working on no spark was one of issues. Rusted solid crank was major one. Anyhow first couple kicks had spark. Ended up being key switch.

 

Well, I'm out of ideas.

Think I'll have some popcorn.

[J-Madd]

Make sure all black wires and the black/red wire are connected and that the black/white wire isn't grounded or connected to any of the aforementioned wires.

[bigweav81]

Weak leg lol. I could start mine by hand. If it's turning over fine. I'd say your kick starter is ok.

 

Sent from my SM-S820L using Tapatalk

[wayne_smith97]

You need to get next to a known good banshee and start swapping parts. CDI's are generally all or nothing but I have seen some crazy stuff like this one time. Ended parts swapping with bhatch21 and eventually the Cdi was the problem.

[broke350]

I just had the same thing happen with mine and it was the CDI.  Had good compression, stator ohmed out fine, pickup coil gap was in spec.  Replaced the wiring harness with a new one, replaced the coil.  In the end, it was the CDI for me.  I bought a procom from JDS Customs as it was much cheaper than factory OEM and I wasn't sure what the problem was.  

[ACZR8000RR]

Just wanted to update, it was the cdi box that was bad. Starting on 1 kick now