V force for stocker?

[maggdog]

Can I use v force or what its better for my stocker banshee? v force 2 or v force 3?

 

or this only for modified motors?

 

only mods is fmf pipes and powercore 2 silencers with stock carb 280 main jetted

[maggdog]

Thanks buddy

[Bennett131]

Might have to go up a jet size on the pilot, and cut the fins off of your stock boots (if you have stock intake boots) in order for them to fit.

[themechanic]

I second vf4 and intakes.

[maggdog]

Might have to go up a jet size on the pilot, and cut the fins off of your stock boots (if you have stock intake boots) in order for them to fit.

What size of pilot?

Edited April 6, 2016 by maggdog

[Bennett131]

What size of pilot?

If you're at a stock 25 now I'd say a 27.5 you will have to try it and see.

[bigweav81]

I had a similar set up. At 600 asl. Fmf fattys, and ran a # 30 pilot.

 

sent from yo mammy house.

[kennethbrantley5]

I have vfr4 on my 4mill with 27.5 pilots and they work great.

 

Sent from my SM-N910V using Tapatalk

[Screamin'Sheela]

Ive got VF3 with a 27.5 pilot... I just changed it from 25 so I can't say definitively, but it seems to be running great so far. 

[Bennett131]

Ive got VF3 with a 27.5 pilot... I just changed it from 25 so I can't say definitively, but it seems to be running great so far.

The recommendations we were giving, we're if you bought 4s like we told you to. 3s work fine too though and your pilot is probably right with the 3s.