Missing Adjuster Locknuts for chain tension

[dttuner]

While riding out at the RAC, I bottomed-out on a rock,on one of the wide coal roads. Nothing alarming.

Ran fine back to trailer, that's when I noticed my skidplate gone, and chain pretty slack.

 

My lower pivot cross-bolt, dg skidplate, and adjuster locknuts (locknuts to tension chain) are all missing.... gone.

 

wtf.

 

I must've hit unobtanium with my skidplate.

 

Did I shear-off frame?

Can this be fixed, and where do I get the parts?

 

(pics incoming)

[dttuner]

Ok, so I understand whats wrong with my banshee, and the parts are on order.

 

Question is... how the freakin' frack did this happen? The lower pivot bolt had to sheer-off on both ends, chain tensioners drop with the bolt ends, and then bolt shaft just falls out...?

 

How would the bolt simply come out, with the brake on one side, and the rear sprocket on the other?

(yes, bolt is accessed through the sprocket holes... but just fall out?)

 

 

 

Edited December 15, 2015 by dttuner

[sheerider11]

NICE! That's a good one.

I'm not sure how you pulled that one off. But next time you go up there let me know. I'll see if I can swing it

[sleeper06]

I gave u too much powa lol

[dttuner]

I gave u too much powa lol

 

Dude, she runs like a champ! Lots of power and very FAST.

Just wish I had some dunes to climb, instead of rocky trails.

[dttuner]

Gents,

 

Besides chain tensioners, and pivot bolt, am I missing any other parts back there?

Edited December 16, 2015 by dttuner

[sheerider11]

I gave u too much powa lol

Wouldn't be the first time

[machinegunbanshee]

Gents,

 

Besides chain tensioners, and pivot bolt, am I missing any other parts back there?

Looks to me like your missing a roundhouse style swinger and a bearing carrier?

[dttuner]

Looks to me like your missing a roundhouse style swinger and a bearing carrier?

 

Crap... anyone got close-up pics of these parts? Trying to find everything I need off Ebay.

My service manual is black/white, and pics are hard to see.

[dttuner]

So now I've gone through the service manual 3 times. There's no parts schematic for the rear chain adjustment/pivot area. WTF.

 

Anyone have a parts schematic and/or parts list for the rear swingarm section, which includes chain tensioner and pivot?

 

 

edit - found this...  Looks like all I need are 2 washers (part# 27 in this schematic).  Do they need to be anything special (locking washers, etc.)?

 

Edited December 16, 2015 by dttuner

[dttuner]

90201-106F2 Washer Plate part#

 

Dude... freakin' $3+ per washer..... I guess my brass washers will have to do.

Edited December 16, 2015 by dttuner

[Bennett131]

What all are you missing? Didnt read the whole thread but i probably have everything you need. Let me know, pay shipping and its yours.

[dttuner]

I think I just need 2 chain tensioner washers (90201-106F2 Washer Plate), and hardware for all 4 skidplate mount points.

[hp2000]

I have all the rear carrier hardware Lmk

 

 

Sent from my iPhone using Tapatalk

[dttuner]

thanks HP!

 

If I don't find what I need I'll hit you up *thumb*