ltpyro Posted July 2, 2015 Report Share Posted July 2, 2015 The banshee pulls into 5th gear fine but goes flat on 6th. Is this a sign of running the bowls down and needing more flow from the carbs or am I looking at a different issue? Thanks for any input. Quote Link to comment Share on other sites More sharing options...
Bennett131 Posted July 2, 2015 Report Share Posted July 2, 2015 I have no fucking clue, but youre going to need more details than that. Quote Link to comment Share on other sites More sharing options...
bluebanshee98 Posted July 2, 2015 Report Share Posted July 2, 2015 More details for sure. All engine mods jets Ect. You may be a little rich on the jetting and also you might be short shifting it and not really winding out the gear like you should Quote Link to comment Share on other sites More sharing options...
ltpyro Posted July 3, 2015 Author Report Share Posted July 3, 2015 Sorry should have included the mods. Fmf gnarled pipes, and ported is all that's done to the engine. Don't ask what kind of port, not sure it was done 11 years ago. I'm rebuilding the bike since its been sitting for about 10 years and want to solve a few things while I'm working on it. Quote Link to comment Share on other sites More sharing options...
ltpyro Posted July 3, 2015 Author Report Share Posted July 3, 2015 Jetting on the carbs I think is 270 or 280, I'm not home at the moment, I'll edit post when I can check Quote Link to comment Share on other sites More sharing options...
ltpyro Posted July 3, 2015 Author Report Share Posted July 3, 2015 Just remembered it has 17cc domes too. Like I said it's been sitting in storage a long time. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.