Wadester555 Posted June 27, 2015 Report Share Posted June 27, 2015 Bought new banshee and then a new used motor off eBay then it ran for awhile and then I got the carbs adjusted and tuned etc from the local shop ran on some dirt around my brothers house but I took it to the dunes today and it run good for awhile then wouldn't pull its self and always Bogged out, took it home and took off the head and inspected the cyls and pistons and they are good. What else do I need to look at? Thank you guys!! My thought is my carbs are to big because I've had a issue with flooding and he shop also said the cyls were fill with gas my brother in laws banshee has stock carbs and they are super tiny compared to mine. PLEASE HELP Quote Link to comment Share on other sites More sharing options...
tfaith08 Posted June 27, 2015 Report Share Posted June 27, 2015 Flooding is float related. Have you cleaned the carbs and set the float height? Sent from over there. Quote Link to comment Share on other sites More sharing options...
hoppedupandcutdown Posted June 27, 2015 Report Share Posted June 27, 2015 Should have done a compression test and leak down test BEFORE pulling it apart. Could have just needed new spark plugs. (and the float problem fixed) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.