Andybhoy86 Posted June 24, 2015 Report Posted June 24, 2015 I wonder if anyone can help me here... My lock nut on my rear axel just seems to move about freely, it seems like the only thing stopping the axel from sliding out is the C clip ? The nut also looks like it is on the axel back to front as the side that faces the wheel has a thread on it , it looks like its supposed to have something bolted on to it on to it or as if it has to be threaded on to the sprocket (if that makes sense?) Just looking for some advice peeps as this is my first shee Thanks in advance. Quote
Larry's Shee Posted June 24, 2015 Report Posted June 24, 2015 Maybe a pic of what you got going on? Quote
richard.alexander.9003 Posted June 24, 2015 Report Posted June 24, 2015 It's sounds to me like it may not be a Yamaha axle none of my shees have ever had a clip holding the nut in place, sounds like it may be a Honda axle or something else, as for mine, yes the nut does like to come loose sometimes, I tighten the shit out of it and it will eventually backs off over time, of course I am almost 3 times stock hp, try using a pipe wrench with a cheater bar and see if that works Sent from my HTC6525LVW using Tapatalk Quote
ECshee Posted June 24, 2015 Report Posted June 24, 2015 just make sure it doesnt bind on the carrier. ive been having that issue.. Quote
Andybhoy86 Posted June 25, 2015 Author Report Posted June 25, 2015 Here are the pics of the axel and lock nut , it looks back to front to me on the axel there is a groove for a C clip to slide into , it seems this is all that holds my locknut in place to stop the axel sliding out? Quote
Andybhoy86 Posted June 25, 2015 Author Report Posted June 25, 2015 for some reason every pic i try and upload , it says the file is too big?? Quote
Juststrokeit Posted June 25, 2015 Report Posted June 25, 2015 iPhone? Tapatalk? Sent from my iPhone using Tapatalk Quote
sheerider11 Posted June 25, 2015 Report Posted June 25, 2015 Photobucket, facebook, tapatalk to upload photos Quote
Andybhoy86 Posted June 25, 2015 Author Report Posted June 25, 2015 Sorry but I dont understand ? Upload them via facebook or save the pic from fb then upload it via laptop? I dont have an iphone , I have sony Z3 Quote
Andybhoy86 Posted June 25, 2015 Author Report Posted June 25, 2015 These are the pics , too me it looks like the nut is round the wrong way as it slides about and all that keeps it in place is a C clip ? Quote
Andybhoy86 Posted June 25, 2015 Author Report Posted June 25, 2015 shouldnt it be the other way around and tight against the rear sprocket? Quote
sheerider11 Posted June 25, 2015 Report Posted June 25, 2015 That's an anti fade. You need to turn it till the inner part backs it's self into the hub and presses against it Quote
sheerider11 Posted June 25, 2015 Report Posted June 25, 2015 I just ordered a brand new one from durablue. I'll see if I can fish out the printed instructions Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.