crazysteve50 Posted May 8, 2015 Report Posted May 8, 2015 Just found out this stud looks to be cut. Repairable? Sent from my iPhone using Tapatalk Quote
98_sheester Posted May 8, 2015 Report Posted May 8, 2015 Take 2 head nuts thread one on upside down then take another and thread it on regular...the flat sides should be tight together then take 2 wrenches put on each nut and break it loose Quote
sheerider11 Posted May 8, 2015 Report Posted May 8, 2015 Take 2 head nuts thread one on upside down then take another and thread it on regular...the flat sides should be tight together then take 2 wrenches put on each nut and break it looseNot enough room for that. You can try a stud extractor. But since your not gonna reuse it clamp that fucker with some vise grips. PB blaster and heat will help also. Quote
98_sheester Posted May 8, 2015 Report Posted May 8, 2015 It think itll work but if not grip the shit out of it Quote
registered user Posted May 9, 2015 Report Posted May 9, 2015 some of them studs like in the cylinder are a goofy size. 6mm extractor is to small and 8mm is to big. american size extractor may work. can rent em from autozone for free Quote
BANSHEE HP Posted May 9, 2015 Report Posted May 9, 2015 http://www.amazon.com/Titan-Stud-Puller-Drive-Model/dp/B00265M8N4 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.