do-work-son Posted April 17, 2015 Report Posted April 17, 2015 Y29l ain't that wang 110 rod? Then y29 l/r was the long rod wang? Quote
98_sheester Posted April 17, 2015 Report Posted April 17, 2015 Does look like you had a coolant leak in there some where but another good thing is your not getting any blow by so your rings are still good. And if the bore feels smooth id put some mics on it to see if you can re ring it since your already there jus my own .02 Quote
sleeper06 Posted April 17, 2015 Report Posted April 17, 2015 What was it doing to make you pop the top off it, I would have checked squish . What you had right there can run in the right hands. Most would consider it it a cobbled together. If it were me and planned on building something else later I would deck the cylinders and head for a good seal and put it back together , that look to be wang crank that I wouldn't put a wampus over unless u let me swap rods n bearings and just reuse the webs. Either way it ain't cheap , if your gonna order a cool head from Jeff 22 cc domes won't cut it on a 4 mil for pump need 23.5-24 cc domes if it were my motor I would deck the cylinders about .005 order .025 and .030 base gaskets 24 cc domes and noss head . If u need to clean the cylinders up let me know Quote
Pasi S. Posted April 17, 2015 Report Posted April 17, 2015 Is the other piston 513MO6600 and the other one 513MO6500?My old eyes are not that good anymore - LOL! Quote
Pasi S. Posted April 17, 2015 Report Posted April 17, 2015 Check/measure the cylinder height too. I have old set of stock cyl´s and there is 0.15mm difference in height. Quote
kenyounot Posted April 18, 2015 Author Report Posted April 18, 2015 What was it doing to make you pop the top off it, I would have checked squish . What you had right there can run in the right hands. Most would consider it it a cobbled together. If it were me and planned on building something else later I would deck the cylinders and head for a good seal and put it back together , that look to be wang crank that I wouldn't put a wampus over unless u let me swap rods n bearings and just reuse the webs. Either way it ain't cheap , if your gonna order a cool head from Jeff 22 cc domes won't cut it on a 4 mil for pump need 23.5-24 cc domes if it were my motor I would deck the cylinders about .005 order .025 and .030 base gaskets 24 cc domes and noss head . If u need to clean the cylinders up let me know If you can clean the cylinders up with me there Ill come by im not driving to long island and back 4 times lol Quote
sleeper06 Posted April 18, 2015 Report Posted April 18, 2015 That's fine or ship the shit and I'll send it back , prob $40 round trip shipping and gas might be more but either way Quote
kenyounot Posted April 20, 2015 Author Report Posted April 20, 2015 Ordered fast head with 24cc domes. He recommended a .18 base gasket. Also bought a 50mm turbo Quote
98_sheester Posted April 20, 2015 Report Posted April 20, 2015 Never seen a boosted shee only like 400ex 4 strokers this could interest me lol Quote
kenyounot Posted April 20, 2015 Author Report Posted April 20, 2015 Said its going to be like 2 weeks for the head to get here unfortunately. Quote
kenyounot Posted April 20, 2015 Author Report Posted April 20, 2015 I was kidding about the turbo lol Quote
sheerider11 Posted April 20, 2015 Report Posted April 20, 2015 Never seen a boosted shee only like 400ex 4 strokers this could interest me lolBennett. Quote
98_sheester Posted April 20, 2015 Report Posted April 20, 2015 I have a boosted eclipse and now maybe a boosted shee oh boyy! Sheerider you talkin bout a member has one Quote
n2otoofast4u Posted April 20, 2015 Report Posted April 20, 2015 Is the other piston 513MO6600 and the other one 513MO6500? My old eyes are not that good anymore - LOL! Im with you. They look like 65 and 66. Quote
kenyounot Posted April 20, 2015 Author Report Posted April 20, 2015 After the comment i checked the pistols they are the same. Don't scare me man I'm already in enough shit lol Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.