foltzman1994 Posted January 23, 2015 Report Share Posted January 23, 2015 Have a few banshee parts for sale. I have 100% positive feed back on ebay but pretty new to this site. I would trade parts towards lockout cluch/ cover, 4mm,a arms,and a modified transmission. Ask as many questions as needed my phone number is 218-849-3543 what ever is easiest for you Thank you Plus 4 swing arm powder coated blue 125 shipped Stock banshee carbs with boyesen reeds boots boost bottle. Has tors removed. comes with cable and needles 100 shipped Mikuni 34 flat slide I dont know the model number I have never used them.comes with cable 65 shipped 64mm ported cylinders I bought them ported was told they were drag ported but looks more of a aggressive dune has a nick on both cylinders on intake side. i ran the way they are ( see pictures) 300 shipped with pistons and head 64.15 stock non ported cylinders in nice shape have 150 shipped with head noss machine head needs o rings has 20cc domes 75 shipped 3 stock stroke cranks all 3 need stator side bearings for sure one needs rods other two rods seem to be nice yet 100 all three shipped Quote Link to comment Share on other sites More sharing options...
phillydrag Posted January 23, 2015 Report Share Posted January 23, 2015 Are them yellow plastics for sale? Quote Link to comment Share on other sites More sharing options...
foltzman1994 Posted January 23, 2015 Author Report Share Posted January 23, 2015 Nope just got them out of the package lol Quote Link to comment Share on other sites More sharing options...
foltzman1994 Posted January 23, 2015 Author Report Share Posted January 23, 2015 Nope just got them out of the package lol Quote Link to comment Share on other sites More sharing options...
2FastTRX Posted January 24, 2015 Report Share Posted January 24, 2015 Whats the best you could you do for the swinger, 34mm Mikunis, and the Noss head? Quote Link to comment Share on other sites More sharing options...
2FastTRX Posted January 24, 2015 Report Share Posted January 24, 2015 Also, is this a model of head that needs new studs or acorn nuts and are either included? Or will just a set of o rings allow for install? Quote Link to comment Share on other sites More sharing options...
foltzman1994 Posted January 24, 2015 Author Report Share Posted January 24, 2015 I used factory nuts on it. It will need o rings and good to go. Quote Link to comment Share on other sites More sharing options...
foltzman1994 Posted January 25, 2015 Author Report Share Posted January 25, 2015 (edited) Update: stock cylinders sold Head sold 34mm carbs sold Swing arm sold Will sell stock carbs for 70 shipped with cable intake boyesen reeds stock reeds intakes and boost bottle I put a new bearing on one stock crank shaft all other bearings and rods are nice yet will sell crank and stock bore ported cylinders with head and two pistons for 400obo shipped Also have a set of factory head lights. just the ring and lens 15 shipped 450 shipped for everything Thanks Hunter Edited January 25, 2015 by foltzman1994 Quote Link to comment Share on other sites More sharing options...
foltzman1994 Posted January 25, 2015 Author Report Share Posted January 25, 2015 Stock carbs sold Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.