Jump to content

Recommended Posts

Posted

Just purchased a graydon 2-1 carb intake with 35 pwk. Looking for a starting point for jetting. I no eek needles are popular.

Current mods are bills thunderseries full exhaust and knn pods on home made air box no lids. No porting basically stock motor other then a rebuild with vitos dome pistons

 

the places I will be riding will be about 669 feet above sea level and the temps will range from about 50-90 degrees from march to november in michigan. Also planning a trip to silver lake some time in summer

  • 4 weeks later...
Posted

Zilla I'm not saying your bike didn't run good like that I've done about 25 2 into 1 builds and never came below a 185 main on any set up , perfect chops . Any build that was trail ported immediately jumped over 200 main

Posted

Ya guys it will be a while before I tackle this set up. I still have to buy jets gaskets and filter and also intake boots and tubes to make the air box. Funds are low so its a slow moving thing

  • 2 weeks later...
  • 1 month later...
Posted

Ok so I have the intake and carb on. Thing wouldnt start with 145/45 jet. Just fouled out the plugs. It did start with a 42 pilot for a bit but I couldnt get it started after that. Thinking my pilot is still too rich.

Posted

Its synthetic I have been using it for years with the dual carb set up. Didnt have any lubrication issues. Just felt like it wasnt ever tuned right thats why I went with the single carb set up.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...