B.b.p builders Posted November 1, 2014 Report Share Posted November 1, 2014 K&t 535 complete top end, unsure of port timings, Titan domes, ran on methanol, v force 3 reeds, chariot intakes, hot rods crank, and matching cases. $2300 shipped Cp customs this top end was from brent Kelly's 535, some of you might know him? I actually just bought this. But decided to buy/build a DM. Port timings are exhaust 200 transfers 130, there is a post here, that says this top end once made 145hp/86tq with 44 lectrons on methanol. Lots of work has went Into these cylinders. V force reeds, chariot intakes, pistons and reeds have less then 3 hours run time. Selling with a very low hour TDR forged crank with max load bearings. $2100 shipped If you are interested I can send more detailed pictures, pm, text or call 289 seven one six zero613 Also have a duneable override unsure who cut it, 1m Nstock 1-5 override, will send it with all 3 shift forks, but 2 are no good, only sending to keep springs in proper location. 300 shipped Polished DD lock up cover with DD sling shot $300 shipped I will get a pic of the cover up ASAP. Got that 421 powervalve cheetah listed on another post, and 40 mil Packard lectrons, listed in another post also.. Thanks Quote Link to comment Share on other sites More sharing options...
B.b.p builders Posted November 3, 2014 Author Report Share Posted November 3, 2014 I will take 2000$ shipped on the cp customs 535 with crank. Quote Link to comment Share on other sites More sharing options...
B.b.p builders Posted November 3, 2014 Author Report Share Posted November 3, 2014 The k&t 535 has a deposit down on it. Quote Link to comment Share on other sites More sharing options...
B.b.p builders Posted November 3, 2014 Author Report Share Posted November 3, 2014 Cp customs 535 with crank $1800 Quote Link to comment Share on other sites More sharing options...
B.b.p builders Posted November 4, 2014 Author Report Share Posted November 4, 2014 Offers on the cp customs 535 top end? Pm me Quote Link to comment Share on other sites More sharing options...
camatv Posted November 4, 2014 Report Share Posted November 4, 2014 1000.00 with crank Quote Link to comment Share on other sites More sharing options...
B.b.p builders Posted November 4, 2014 Author Report Share Posted November 4, 2014 Parts just don't seem to bring good value these days, but I would not sell this set up for 1000$. The pistons and reeds have less then 3 hours run time, crank maybe 10 hours run time. 450 for the tdr forged crank Quote Link to comment Share on other sites More sharing options...
B.b.p builders Posted November 4, 2014 Author Report Share Posted November 4, 2014 Quote Link to comment Share on other sites More sharing options...
Piediddy Posted November 5, 2014 Report Share Posted November 5, 2014 Good seller here, Rob is a good dude to do business with. And yes only about 4 gallons of fuel ran through pistons/rings, reeds and intakes Quote Link to comment Share on other sites More sharing options...
1in or 300 Posted November 5, 2014 Report Share Posted November 5, 2014 Good guy here if says its only has a couple of hours of run time his word is good for me if u still have it Friday ill take it so I just get one big box of good parts Quote Link to comment Share on other sites More sharing options...
B.b.p builders Posted November 5, 2014 Author Report Share Posted November 5, 2014 Sounds good Anthony. Thanks! I actually hope you get it. Make it much easier for me. Quote Link to comment Share on other sites More sharing options...
B.b.p builders Posted November 7, 2014 Author Report Share Posted November 7, 2014 Everything is sold Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.