ClayAiken Posted September 16, 2014 Report Posted September 16, 2014 So ive been getting a dust/dirt build up around my right side reed, i am afraid this is a air leak so im gonna pull it apart and put in new reed gaskets. I was reading my clymers and on the removal it says remove any sealer if there is any but they don't say to apply sealer on installation. You think i should put some rtv on there or is just a gasket enough? What do you guys do? Quote
Bennett131 Posted September 16, 2014 Report Posted September 16, 2014 I have never used any, just buy the good gaskets. Quote
ClayAiken Posted September 16, 2014 Author Report Posted September 16, 2014 There the gaskets that chariot sold awhile ago everyone on here was buying them they've been in a sealed plastic bag. Think there good to use? Quote
Bennett131 Posted September 16, 2014 Report Posted September 16, 2014 Idk why they wouldn't, I mean look at them and check them out. If they appear to be ok use them, then do a leak down test to make sure. Quote
sheerider11 Posted September 16, 2014 Report Posted September 16, 2014 I always use some sort of sealer on all gaskets. Permatex copper spray for gaskets is good. Quote
ClayAiken Posted September 16, 2014 Author Report Posted September 16, 2014 Thanks guys I'll look into that spray Quote
2004LEBanshee Posted September 16, 2014 Report Posted September 16, 2014 If there the thicker gasket metarial that is kinda fiberish throw them the f out. I bought them off ebay and on a leak down test i could get tiny bubbles to come out of the gasket. Theses were silconed on too. The fiber will pass air. Use v force style gaskets. There real thin and solid. They dont leak. Quote
ClayAiken Posted September 17, 2014 Author Report Posted September 17, 2014 I'll snap some pics tomorrow Quote
ClayAiken Posted September 17, 2014 Author Report Posted September 17, 2014 They are thin though Quote
registered user Posted September 17, 2014 Report Posted September 17, 2014 get some oem gaskets and be done with it. alot of that aftermarket shit is garbage. shouldnt need any sealer but you can use it if you want. Quote
KAMIKAZE Posted September 17, 2014 Report Posted September 17, 2014 Ive used this plenty of times with no issues, its the only one they list as fuel safe Quote
lil Doobie420 Posted September 17, 2014 Report Posted September 17, 2014 Yamma bond or 1211.is what I was told to use. Quote
sleeper06 Posted September 17, 2014 Report Posted September 17, 2014 I use 1211 when it's dry all the bolts could rattle out and you still won't get an air leak. Use ascetone on a clean terry cloth prepare the surfaces and your good to go Quote
Starwriter Posted September 18, 2014 Report Posted September 18, 2014 Here's a thought. How about, do a leakdown test before you take it apart. BTW, if you are running VF2 reeds, you need VF2 reed gaskets between the reed block and the intake boot. I also use 1211 on intake gaskets and let it set up before doing a leakdown test. Quote
registered user Posted September 18, 2014 Report Posted September 18, 2014 alot of sealers say dont use in contact with gas if you reed the package but ive never had a problem with any of it. got a couple that been together for years with permatex ultra black and no problems Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.