Jump to content

Recommended Posts

Posted

Hey guys got a problem. I did a few searches and came up with nothing. So the problem is I just got my new to me 1992 banshee back up and running after putting a stator on it. I tested it before installing and it all checked out good. Well I started it up and everything looked good. I took it for a short ride and my lights cut out then my left light came back on but was a violet/purple color and then went back out and neither will come back on.What would cause that?

Posted

Sounds like either the voltage regulator is unplugged or it's bad. Look at the silver single wire metal box under the seat next to the CDI. Make sure it's plugged in and the ground wire is under 1 of the bolts. If it's plugged in, start it up, rev it up, and check the voltage with a multimeter.

Posted

PIAA are a great factory replacement...they also make LED direct replacement...there on ebay but there a tad salty....

 

My wife bought a set of halogens from Tusk and so far ao good

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...