Kmaxwell12

Looking for a +2 round style swing arm set up for my 93 banshee. If you have one and interested in selling pm me or text me 33479six5448. Please NO Chrome swingarms Thanks guys

so ive heard a lot of good reviews on upp racing but is there any other brands that sell a complete kit for a banshee that is worth looking into?

Thank you hoppedup. That's exactly what I needed.

I have 1 roller that I believe is the bottom one. But I'm going to just buy a full kit with both rollers, swing arm slider, and guide from upp racing

Ok haha its not the best to use a phone to post topics. The amp link that came on my shee bit the dust and I'm trying to find out how to install the 2 chain rollers that are suppose to be on the frame. I'm not sure where on the frame they go and needing pics or a diagram. Sorry for the jacked up first post my phone auto corrected stuff that didn't need it.

984mmshee so are you around the Russell area? I'm just south of wilson lake and trying to find places to ride other than dirt roads

I will try stock pilots then they are 25's right? And I'll get in between them also and give them a shot thanks guys.

Ok guys another newbie question lol. My banshee came with a amp link setup that but the dust so I ordered one roller but didn't know there are 2 plus a a arms slider till now. So how do I install them because I can't figure it out and I'm getting nothing with search or google. Any one got pics of how there's is set up? I know certain swing arm sliders you have to remove it to install the new one. Thanks guys again sorry for the new question. I'll make a how to for it with plenty of pics.

I might try the piaa's unless they are to pricey. I've heard tusk has decent products.

I'll pick up a few jets and try them out. I heard fmf like the 30 pilot and it starts usually on the first kick and no low end bog so I think the pilot is good. I'm gonna drop a main size and see what it does. Where do you ride at camatv? I'm about 40 min west of salina right off of I 70

So black and dry is good? Sorry still new to banshees and slowly learning all the stuff I need haha

Haven't done a plug chop yet but the plugs in it now have 30 to 45 min on them and they are black and dry. I'll do a chop when I get home in a little bit.

Hey wanting to make sure my jetting is about 4ight. I have full fmf gold series pipes, k&n filter with outer wears, drilled airbox lid on, bored to 65 mm with stock carbs and +4 timing. I'm running 300 mains 30 pilots air screw out 3 turns and needle on the next to bottom clip, running 91 octane and klotz supertech40:1. It pulls strong but feels like it's running hot and the plugs look very dry to me. I'll post pics here in a few min. Any advice?

Ok turns out the regulator was loosely bolted on haha so my high beams are blow but lows still work.... anyone recommend a bulb for replacement?

@MattG I'm still set up for ac power so I have no battery. I'll make sure the regulator is still hooked up and test it today.