turbowrenchhead Posted June 20, 2014 Report Posted June 20, 2014 When I was taking with one of the engine builders he was taking about some of the case studs causing an air leak. What had to happen to fix this? I can't find any info on this mod. Quote
BANSHEE HP Posted June 20, 2014 Report Posted June 20, 2014 Do yours leak or are you just asking a board question? Quote
Nieskes Posted June 20, 2014 Report Posted June 20, 2014 When I was taking with one of the engine builders he was taking about some of the case studs causing an air leak. What had to happen to fix this? I can't find any info on this mod.this will show up on a leak down test, it does happen but not often. If you get enough sealant around the stud there would be no reason it would leak. Quote
turbowrenchhead Posted June 20, 2014 Author Report Posted June 20, 2014 (edited) I usually install base gaskets dry with no sealant Edited June 20, 2014 by turbowrenchhead Quote
turbowrenchhead Posted June 20, 2014 Author Report Posted June 20, 2014 Do yours leak or are you just asking a board question? My current case doesn't leak. I'm having a builder do another motor with different cases and cylinders. Reusing the bottom end internals. I just want to know more about this mod. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.