uman1030 Posted May 27, 2014 Report Posted May 27, 2014 Take the spark plug boots off. Trim back the wire some and reinstall the boot/cap. Quote
TwistedMethods Posted May 28, 2014 Author Report Posted May 28, 2014 Jo just redid my ground coming off my cdi seems to be sparking on both sides now but it's to late here to try an start it so I will update tomarrow thx for the help Sent from my iPhone using Tapatalk Quote
TwistedMethods Posted May 28, 2014 Author Report Posted May 28, 2014 Carbs are pissing gas now I think float/floats are stuck found out the stockers I traded for have 320 mains , 22 pilot 3rd clip not sure how that would work, cause I haven't had it running . I need to go over all the wireing , an check stator points or w.ev Sent from my iPhone using Tapatalk Quote
03DMshee Posted May 28, 2014 Report Posted May 28, 2014 I wouldnt go any lower than 25 pilot...id maybe go 27.5 Quote
lil Doobie420 Posted May 28, 2014 Report Posted May 28, 2014 I had a feelin it was the ground. Make sure u measure the float hight. Maby polish the brass seat with toothpaste. There's also an oring under the seat that can leak on stock carbs.. Quote
TwistedMethods Posted May 28, 2014 Author Report Posted May 28, 2014 Damn thing still won't start lol wish I lived in the states where all you guys are I need physical help no idea what I'm doing with wireing or carbs it's got spark but it's weak ..... Sent from my iPhone using Tapatalk Quote
TwistedMethods Posted May 29, 2014 Author Report Posted May 29, 2014 Will a wire tester work without bike running like if I kick it over while holding it on certain wires ? Sent from my iPhone using Tapatalk Quote
TwistedMethods Posted May 29, 2014 Author Report Posted May 29, 2014 What's the pickup gap ? I never set that I don't think I just bolted everything back on .. Sent from my iPhone using Tapatalk Quote
03DMshee Posted May 29, 2014 Report Posted May 29, 2014 18 thousandths. ..or a credit card if your lacking tools.... Quote
TwistedMethods Posted May 29, 2014 Author Report Posted May 29, 2014 Help anyone ? I'm gonna post some pics of the harness when I'm home Sent from my iPhone using Tapatalk Quote
TwistedMethods Posted May 29, 2014 Author Report Posted May 29, 2014 On my wire harness near the plug coil wires there's 2 blacks an a yellow wire going to nothing I will put a pic soon Sent from my iPhone using Tapatalk Quote
trxbansheer Posted May 30, 2014 Report Posted May 30, 2014 Could be the CDI Box. A bad spark plug, or the wire. Maybe the stator. Quote
lil Doobie420 Posted May 31, 2014 Report Posted May 31, 2014 If you took the flywheel off. Its the black pick up next to it . The gap between that and the raised parts on the fly wheel. Needs to be set at .018in or ucould have a week spark. Tap it over with a screw driver if the gap is too big. Quote
TwistedMethods Posted May 31, 2014 Author Report Posted May 31, 2014 I'm just going to look for a cheap CDI an wire harness I guess 1 last thing I'm gonna try is setting the pick up do I loosen the 2 star screws when I go to adjust it ? Sent from my iPhone using Tapatalk Quote
sheerider11 Posted May 31, 2014 Report Posted May 31, 2014 I'm just going to look for a cheap CDI an wire harness I guess 1 last thing I'm gonna try is setting the pick up do I loosen the 2 star screws when I go to adjust it ? Sent from my iPhone using Tapatalk Wait, so when I tell you to get a new harness you start crying that people are assholes an why would we offer that advice. But now your going to get a new harness? Are you fucked up? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.