flyfistol532000 Posted May 13, 2014 Report Posted May 13, 2014 I'm going Cheetah Cub cylinders n my banshee. The place I call who sold the complete kit. I already have a short rod 4mil crank & someone at that place told me they don't make Cheetah Cubs for short rod cranks. Is it only this company that doesn't sell them or do I have to have a long rod crank? Quote
flyfistol532000 Posted May 13, 2014 Author Report Posted May 13, 2014 Ok since I already have the 4mil crank in my bike I wanna just get the cub kit minus the crank. Will there be a BIG difference n performance if I stay with the short rod crank instead of getting the long rod crank or will there be a noticeable difference n speed? Quote
trickedcarbine Posted May 14, 2014 Report Posted May 14, 2014 Not really a noticeable difference. The short rod may rev a cunt hair faster and higher. The long rod is more of a reliability deal. Quote
WINDYCITYJOHN400 Posted May 14, 2014 Report Posted May 14, 2014 Parts depot IS Trinity racing. Run far. Run fast. Call one of the site sponsors. Quote
flyfistol532000 Posted May 14, 2014 Author Report Posted May 14, 2014 Thanks for all your help. I just have a couple more questions for you'll. I talked with John over at SandToyz & he told me that he had the Cubs & pistons4the short rod crank. Would I have to have my cylinders ported or can my mechanic just slap them on & it'll be ready to ride? When I was goin to get this setup b4 someone told me when I buy them I had to port them b4 I could put them on. My mechanic mentioned a dune port to me. I mainly ride my bike on the street & do some street racing (not planning on goin to the track) but I do wanna go faster. Quote
Nightmare Posted May 14, 2014 Report Posted May 14, 2014 You can run them as cast but get them ported if you want more speed. Sent from my XT1080 using Tapatalk Quote
possum Posted May 15, 2014 Report Posted May 15, 2014 No dont have your "mechanic" dune port the cub. just run it as cast. get the right parts, gasket, domes, etc. and bolt it up Quote
WINDYCITYJOHN400 Posted May 15, 2014 Report Posted May 15, 2014 You can run them as cast but get them ported if you want more speed. Sent from my XT1080 using Tapatalk Or you can have Passion port them and they will go slower. No dont have your "mechanic" dune port the cub. just run it as cast. get the right parts, gasket, domes, etc. and bolt it up Follow THIS advice. ^^^ Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.