Newcs222 Posted May 2, 2014 Report Posted May 2, 2014 280 main 30 pilot jet, Coolhead, Fmf exhaust, pod filters. I had a hard time getting fuel into the jugs after getting my cylinders bored and wiseco pistons installed. I opened the plugs and dumped fuel down the jugs. Started right away but will only idle if I have the choke out all the way. I know this means it's lean but with a 30 pilot? Air adjust screw is all the way in. Do I need a larger main? Sounds good when the choke is fully out. Even if it's half way it's idling pretty high. The carb slides are fully down and in the correct carb. Choke tube is connected between the carbs Sent from my HTC One using Tapatalk Quote
Newcs222 Posted May 2, 2014 Author Report Posted May 2, 2014 One on the slides was stuck. It's all good. Please remove post Sent from my HTC One using Tapatalk Quote
Starwriter Posted May 2, 2014 Report Posted May 2, 2014 Oh man!! That sure sounds like you have an air leak. Do not ride that until you do a leakdown test. Since you didn't mention that it passed leakdown, I'm assuming you didn't do it. Quote
Newcs222 Posted May 3, 2014 Author Report Posted May 3, 2014 Leak down test is always done after rebuild, that's a given Sent from my HTC One using Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.