Few banshee question's . I need a little help .

[Bansheeteddy]

Help , street ride , drag race and wheelie a lot in Philadelphia. The engine has a stock stroke true & welded crank , weisco 0.30 over pistons , billet adjustable timing plate set at +4 degrees timing , t5 full exhaust , vforce 4 reeds , moose reed spacer , billet water pump , oversized radiator , 15/40 geared sprockets .

 

 

I don't know what size carburetor's to go with. I was thinking between 28-30mm ? An was size domes to use with pro design cool heads? I want to stay on pump gas .

[Bansheeteddy]

I meant I street ride

[03DMshee]

With what you have done to your bike stock carbs are fine...just wasting money and gas to go any bigger....

[special06shee]

Take reed spacers out and throw them away.

[Bennett131]

im not sure of your elevation there but I live in pa as well I was running 20cc domes on pump gas but if you want to be safe id say 21 they are all a little different

[Bansheeteddy]

Take reed spacers out and throw them away.

whats the knock on the Reed spacer ?

[Bansheeteddy]

With what you have done to your bike stock carbs are fine...just wasting money and gas to go any bigger....

ok thanks I will stay stock carburators and get them jetted to my set up

[Bennett131]

you only need them to clear your clutch arm if youre running a different carb set up I don't think they do anything for you performance wise

[Bansheeteddy]

im not sure of your elevation there but I live in pa as well I was running 20cc domes on pump gas but if you want to be safe id say 21 they are all a little different

Philadelphia Elevation: 40 feet above sea level

[Bennett131]

im at 1200 ft so that being said 21cc is pushing it...id go 22cc

[Bansheeteddy]

Ok