Gotta Go Ride'n Tommorrow And Shees Broken

[XTShee]

Guyz Guyz Guyz,

 

Last weekend I flipped the Shee and I ended up bendin my key, at the time I didnt know so i turned it off and took the key out.

Went to start it up tonight to test her out, saw the key and was like o shit thats messed up, it still fits in but it wont turn.

 

So whats the best way to hotwire it?, I dont really wanna cut the ignition off, as I would like to get it going again, I just need a quick fix for this weekend.

 

PM me with the method if you dont wanna post it for the world to see. (theives suck ass)

 

Peace out

 

XT

[evil]

you can follow it down to where the red and brown wire connect at the plastic connector and cut above the connector and connect those two wires togather and when you dont want it to start, unplug it, i do this all the time and if you need another key switch with 2 keys pm me i have the one off my 01. later

[XTShee]

Thanks evil your a lifesaver, I might take you up on that offer for the key switch,

I will give mine a good look at tommorow and let you know after the weekend.

 

I have been trash talkin my Old mans mates all week, would suck i had to show up on the old TRX cause i couldnt get the shee started

[evil]

ohhh no x, well get that thing running today. have fun. later

[XTShee]

Yo,

 

I cut the 2 wires above the connector and twisted the red and the brown together,

But it still wont start, petrol is gettin through but i am getting no spark, I have tried new plugs but still no luck,

 

Any Ideas?

 

Would my kill switch be interfering with any thing now that i am bypassing the ignition

 

Also it will spark every now and again like 1 out of every 15 kicks

[XTShee]

Dont worry got it sorted, the bloody bucther that owned my bike before me fucted with the colours,

 

gotta go some some grizzly now

[evil]

Dont worry got it sorted, the bloody bucther that owned my bike before me fucted with the colours,

 

gotta go some some grizzly now

wheew ride on man !!

[Banchetta]

Try bypassing the kill switch on the handlebars, its the black/white or yellow striped wire that goes from the kill switch on the handlebars to the gas tank. By the gas tank, there is a single connector, disconnect it... I've also seen the little black box do what your saying...Tors...is that disconnected/??