bansheeguy_81 Posted March 19, 2014 Report Posted March 19, 2014 I bought a banshee a couple weeks ago and only rode it once since then.i mixed my gas at 40:1 and thats wat the guy told me he mixed it at. Well i noticed its not smoking like it did when i looked at it when he rode it and idled it. Im new to banshees so im truing to figure this out before i do more damage. It seems to run fine and has all the power. Would it be the oil i used in the premix? Sent from my SPH-L710 using Tapatalk Quote
tdod101 Posted March 19, 2014 Report Posted March 19, 2014 40:1 is fine, just check your jetting, what are your mods ? Quote
bansheeguy_81 Posted March 19, 2014 Author Report Posted March 19, 2014 No mods really pretty basic bike. 28mm carbs and full t5 toomy exhaust. Sent from my SPH-L710 using Tapatalk Quote
jigsaw4089 Posted March 19, 2014 Report Posted March 19, 2014 I like 32:1, you should check your compression though and make sure its healthy IMO!! Quote
Larry's Shee Posted March 19, 2014 Report Posted March 19, 2014 Welcome !! Removing snorkle from a bone stock is considered a "mod" as is anything that changes the way air/fuel enters or leaves the engine. Do you know what kind of oil the previous owner used? What oil did you use? Some oil smokes more than others even at same ratio. Quote
bansheeguy_81 Posted March 20, 2014 Author Report Posted March 20, 2014 Wat kind of oil have u found works good Sent from my SPH-L710 using Tapatalk Quote
wayne_smith97 Posted March 20, 2014 Report Posted March 20, 2014 I only use klotZ supertechniplate Quote
Larry's Shee Posted March 20, 2014 Report Posted March 20, 2014 Klotz Benol for me and the son. 28:1 , manual actually calls for 24:1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.