MRSHEE2014 Posted March 1, 2014 Report Posted March 1, 2014 Hello, i am new with this, i put a new transmission override 1-5 and i had problems. After finish the motor, i kick the banshee and start correctly. I started to throttle it in neutral, and inmediatly a shift enter alone and the atv start to go fast and i could stop it with the kill switch. When the motor is off the transmission Was in neutral again. I could not dissambly the banshee because or the time. But maybe you could told me some ideas about this problem. Thanks Quote
Redline Racing Posted March 1, 2014 Report Posted March 1, 2014 Is it a neutral down or standard neutral override? Did it come with springs for shift fork rail? Quote
MRSHEE2014 Posted March 1, 2014 Author Report Posted March 1, 2014 Standard neutral. Could you explain me about the springs? Quote
Redline Racing Posted March 1, 2014 Report Posted March 1, 2014 So you have no springs on the rail the shift forks ride on? If not so you need to tear mtr apart and install one . It will go between shift fork # 1 and side of case. This is on the rail with 2 forks. Did you buy tranny new or used? Quote
MRSHEE2014 Posted March 1, 2014 Author Report Posted March 1, 2014 The spring is complete along the raíl? You Have some idea about the harder of this spring ? With this the problem is solved? Thanks Quote
Surfrjag Posted March 3, 2014 Report Posted March 3, 2014 If you dont have the spring it will jump into gear Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.