Banshee350cc Posted February 18, 2014 Report Posted February 18, 2014 I am currently rebuilding my 03 banshee. It's totally stripped down now. Frame is going to the powder coaters for a new colour scheme. This leaves me with the engine Quote
sheerider11 Posted February 18, 2014 Report Posted February 18, 2014 I would send the whole motor like that to be rebuilt. Get it ported, go 4 mil, get the trans done, nice clutch and basket. Have a 100% fresh bike for the season. But it might be way out of your budget I don't know. Quote
Starwriter Posted February 18, 2014 Report Posted February 18, 2014 Do a leakdown test. If it passes, run it. Or as mentioned, bust it all apart and redo everything. Quote
HOOVER Posted February 18, 2014 Report Posted February 18, 2014 If you do NOTHING else....clean the damn thing LOL Quote
Banshee350cc Posted February 19, 2014 Author Report Posted February 19, 2014 Haha yeah I think that goes without saying HOOVER. Is there any mods I should consider? It's mainly used for street riding and green laning. Quote
Larry's Shee Posted February 19, 2014 Report Posted February 19, 2014 compression test before you tore it out of the frame Quote
Banshee350cc Posted February 19, 2014 Author Report Posted February 19, 2014 Why before? Can you not do it when it's out like? Quote
Uf21 Posted February 19, 2014 Report Posted February 19, 2014 Why before? Can you not do it when it's out like? You need to get the compression up in the cylinders by kicking the Kickstart with ignition off. Quote
tdod101 Posted February 19, 2014 Report Posted February 19, 2014 Get some vforce 4 reeds and advance your timing +4, and may as well do a new top end. If your not gonna put a 4 mil crank and porting that is Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.