Air box lid advice

[hpemk1]

I've fitted toomey t3 pipes to the banshee and fitted 280 main jets , with the air box lid and standard filter fitted it bogs a bit flat out. But if I take the air box lid off it revs a lot more top end, the thing is I don't want to leave the lid off as I do a lot of sand riding what should I do instead? Also will it damage the motor if I run it with the lid and it bogs a bit

[bluebanshee98]

If your doing sand riding I would just ditch the air box all together and go with pods and outerwears unless you plan to drive the quad into a river... I trail ride my bike and run pods. You shouldn't have any issues with pods. Let the bike breath and rejet accordingly for the pods

[hpemk1]

Silly questions but what are pods and outerwears?

[hpemk1]

I've found out what pods are, would the they make the engine breath a lot more then a standard air box with a k&n but no air box lid? As I do ride in wet muddy conditions a lot.

[tdod101]

Any k&n filter or uni filter will work well over stock, I personally stay away from mud cause I don't like it and the banshees 2 wheel drive anyway. You can for sure run your air box with no lid and it won't hurt anything as long as you jet properly, do you know what setting your carbs are at now ?

 

Fill out this form and report back

 

Main jet:

Needle clip:

Air screw turns out:

Pilot jet:

[WINDYCITYJOHN400]

PODS FTW

otherwise ditch the lid.