cwdaniel Posted January 2, 2014 Report Posted January 2, 2014 Our Banshee has extended A arms but I don't know by how much. I need to replace a steering arm and need to know how long stock is for comparison. Quote
uman1030 Posted January 2, 2014 Report Posted January 2, 2014 Our Banshee has extended A arms but I don't know by how much. I need to replace a steering arm and need to know how long stock is for comparison. most likely +2 wider +1 forward seems to be the most common extended a arms. Could wrong obviously i believe stock is 13 1/4 so if its +2 then you would need 15 1/4 this is not including tie rod ends cant you just measure the existing one for replacement size? Edit** apparently the tierod i measured was already a +2 1 Quote
cwdaniel Posted January 3, 2014 Author Report Posted January 3, 2014 most likely +2 wider +1 forward seems to be the most common extended a arms. Could wrong obviously i believe stock is 13 1/4 so if its +2 then you would need 15 1/4 this is not including tie rod ends cant you just measure the existing one for replacement size? They measure 13 and I'm sure the A-arms are extended. That's why I'm looking for the stock baseline number. The suppliers seem to just describe them by the +number Quote
Starwriter Posted January 3, 2014 Report Posted January 3, 2014 Uman was obviously smoking crack when he posted. Stock tie rods are 10 7/8" long not counting the tie rod ends. So, that would make it sound like you have +2 arms. Just for confirmation, the stock upper A arms measure 10 3/4" from the center of the pivot tube to the center of the ball joint. Quote
uman1030 Posted January 3, 2014 Report Posted January 3, 2014 Uman was obviously smoking crack when he posted. Stock tie rods are 10 7/8" long not counting the tie rod ends. So, that would make it sound like you have +2 arms. Just for confirmation, the stock upper A arms measure 10 3/4" from the center of the pivot tube to the center of the ball joint. Good guess but incorrect kind sir. how about the tierods i have sitting here that i thought were stock size are apparently +2. Quote
cwdaniel Posted January 3, 2014 Author Report Posted January 3, 2014 Crack pipe or not, you guys have solved my mystery I think. Thanks Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.