ATVridinMaNiAc Posted December 12, 2013 Report Posted December 12, 2013 Just need an idea of jetting to crossover from stock Carb to 28 pwk. My stockers I believe are 300 main 27.5 or 30 pilot forget which. Needle is 4th or middle I believe. Been a while since I've had em that far apart. Wanting to get a general idea to start so I can get some jets ordered. Thanks. Quote
Surfrjag Posted December 12, 2013 Report Posted December 12, 2013 45-48 pilot 145-158 main with either jjh or n68a needle I beleive you will be in there with those jets Quote
ATVridinMaNiAc Posted December 12, 2013 Author Report Posted December 12, 2013 Alright sounds good I'll start around there. Quote
ATVridinMaNiAc Posted December 13, 2013 Author Report Posted December 13, 2013 Just found it had 50 pilots, 140 mains and n68a needs all the way on the 5th clip position. thinking about starting in the 3rd or 4th clip down. Ordering a 45, 48 pilot and a 145-158 or 160 on mains and start from there. Quote
Surfrjag Posted December 13, 2013 Report Posted December 13, 2013 I doubt you will need anything bigger than 155 mains since you didnt mention port work Quote
ATVridinMaNiAc Posted December 13, 2013 Author Report Posted December 13, 2013 Yea these jugs were ported but i dont think the portjob offers much if any. Somewhat of a hackjob. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.